Frequently asked questions

Kyocera meters

KM3035/4035/5035
Press default/counter button, located upper center of control panel, select counter check on touch screen, counter will be displayed.

KM1020D
Press down and hold the GO key for more than 3 sec. but less than 10 sec. And status page will print, with total count listed under page information.

KM-3820N/KM-3820/KM-5016/KM-5020/KM-5030
Press menu button, scroll down till Print Status Page appears, press enter key, press enter key again, printer prints status page, meter is located in the page information section, as total page count.

FS9100/9500
Press menu button scroll down to others, press enter key, scroll down to service, press > key to print status page, press enter key.

Gestetner meters

1302/1302f/415f/pf
User tools button, counter appears on screen, ok button

1502/1802/615/618
User tools button, counter appears on screen, ok button

618/622
User tools button, counter appears on screen, ok button

660
User tools button, counter appears on screen, ok button


2212/2712/622/627
User tools button, counter on screen

3220/3225
Open front cover, meter located between left side & center

3222/3227
User tools button, counter on screen

3235/3245
User tools button, counter on screen

3502/4502
User tools button, counter on screen

4210
Function button, 6, 222, 84, scroll down to mechanical meters (important Ñ must push yellow, clear, button afterwards)

7016p, 7026p, 7027p, 7045p
Menu, scroll down to list print, hit enter, scroll down to config. Page, hit enter, list will print. Meter is located in top left box of page under pages printed.

DSc224/Dsc324
User tools button, counters on screen, (important get black & color)

5306/5308/5309
Open front cover, look left side, bottom meter

5450
Open front cover, meter located upper center, left meter is total

DSC38 PRINTER
Press menu button, counter appears on display, press ok, the word display shows on display, scroll down to print, press ok, counters print out

Toshiba meters (analog)

1340/50/60/70-1550/1560/1710/2050/2310/2500
Top left corner of panel

1710/2050
Top left corner of panel

2860/2060
Top left corner of panel

3220/3550/4010/4550
Under door on panel right side

5540/6550
Sliding panel right corner

5570/6570
Left corner of panel

2532/2540
Top left corner of panel

5560/6560
Left corner of panel

Toshiba meters (digital)

E160/200/250, E16/20/25
Hit program button, Scroll down with arrows to total counter, hit set, reading will be displayed

E120/150
Hold orange clear/stop button for 5 sec. (flashes 2 numbers at a time)

E28/35/45/55/65
Hit job status button, on screen hit status button, reading will be displayed

E350/450, E352/452, E200L/230/280, E202L/232/282
Press user functions button on control panel, press total counter button on touch panel, press print counter button, print count will then be displayed To print: user functions then select print counters

E550/650/810
Top left corner of panel

E520/600/720/850
Press user functions button on control panel, press print counter tab on display, meter counts will print out

E3511/4511, E351c/352c, E2500c/3500c/3510c
Same as E350/450 (be sure to get black count & color count) To print: user functions then select print counters

E310c
Program tab, next tab, till total counter tab, counters displayed (important to get both meters, black & color)

A higher percent fill means that your system is placing more toner on the page, therefore lowering the expected yield of your toner cartridge. When a manufacturer quotes a certain yield from a toner cartridge, that is, at best, with only 6% of the page covered with toner. More realistically is 10% to 12% or higher. This results in a much higher cost per page than their customers anticipate.

Toshiba color multifunctional (3511, 4511, 281c, 351c, 451c)

Step 1 - Press the User Function button (top left corner of the touch screen)

Step 2 - Press the User Button (top center of the touch screen)

Step 3 - Press the General Button (left side of the touch screen)

Step 4 - Press the Calibration Button

Step 5 - Press the Copy Button

Step 6 - Wait for the machine to print a color chart

Step 7 - The touch screen will prompt you to place the color chart on the top left corner of the glass and press the green Start button

Step 8 - If you have the print option connected, repeat all steps, except that for Step 5 you will press Print instead of Copy. You will have the options for each of the four different print drivers offered (PCL 600x600, PCL 600x1200, PS3 600x600, PS3 600x1200) Calibrate for each print driver that you use. (If you are uncertain, do all four; it only takes a couple of minutes.)